Home
About Us
Fire
Tank
Bilge
General
Contact Us
 
TANK LEVEL MONITORING, DISPLAY, ALARM & CONTROL SYSTEMS

AIM GREY WATER-TC Tank Controller

GREY WATER TANK, LEVEL DISPLAY, ALARM & PUMP CONTROL MODULE

This compact, easy to use, self-contained, flush mount module provides remote tank level display, auto or manual pump start/auto off, pump out control, pump run warning & tank full alarms for your grey water tank.

  • Sealed touch switch controls for greater reliability.
  • Manual pump start switch, auto or manual pump off.
  • Remote 20 Amp C/O pump control relay.
  • Audible alarm isolate / reset switch.
  • Fault monitoring of tank sensor input.
  • Visual sensor fault warning.
  • Status display back illuminated by LED lightbars
  • for instantaneous status recognition.
  • Compact sealed enclosure 48 x 96 x 150 mm deep.
  • Plug-in terminals for all wiring on rear. Refer over.
  • Remote Alarm Relay output.

TLMP-98 Tank Level Monitoring Probe Mounting Options

This system utilises our TLMP-98 Solid State Pressure Transducer to measure the depth of liquid remaining in the tank. Has no moving parts to break or give trouble.

Sensor housed in 316 Stainless Steel enclosure
38mm (dia) x 65(h) mm with stainless steel
1/2" BSPt(m) mounting thread and sensing tube.


The ITIM Systems AIM-TC98 Tank Controller module has an eight (8) way
plug-in terminal on the rear for connection of all external wiring.

Terminals 1 & 2. Power in. 12 or 24 VDC. 1. = Battery -ve 2. Battery +ve
Terminals 3 & 4. Tank Level Sensor. 3. Sensor -ve (Return) 4. Sensor +ve (Feed).
Terminals 5 & 6. Remote Alarm. 5. Remote Alarm -ve 6. Remote Alarm +ve (1A).
Terminals 7 & 8. Remote Pump Control Relay. 7. -ve 8. Switched

THE AIM-TC HAS SIX MULTI-TURN TRIM POT ADJUSTMENTS ON THE REAR AIM-TC98 GREY WATER TANK CONTROLLER ALARM AND PUMP TRIP-POINTS CLOCKWISE TO LOWER TRIP-POINT
ANTI-CLOCKWISE TO RAISE BAR-GRAPH FULL & EMPTY ADJUSTMENTS CLOCKWISE
TO RAISE DISPLAY LEVEL, ANTI-CLOCKWISE TO LOWER. THE CALIBRATION JUMPER DOES NOT
NEED TO BE SET IF MAKING FINE LEVEL ADJUSTMENTS.

 

Innovative Technology for Industry and Marine
P.O. Box 218 Red Hill, Qld 4059, Australia
4 Cramond Street, Wilston, Qld 4051, Australia
ISD + 61 7. Phone (07) 3356 1276. Fax (07) 3356 5693