The ITIM Systems AVA - (Audible and Visual Fire Alarm Unit) consists of a sealed enclosure measuring 125 x 75 x 3Omm deep, with four corner screw mountings and a central 2 way terminal on the rear for connection of +ve & -ve DC power supply.

The AVA provides both Audible and Visual Fire Alarm warning. The audible alarm consists of a modulated pezio electric sounder, producing approximately 90 db at one meter.

The visual alarm consists of an array of red ultra-bright LEDs mounted behind the sealed lexon label to illuminate the visual warning "FIRE - EVACUATE AREA" with a red flashin signal which is visible from a wide viewing angle. The AVA can be either 12 or 24 volt DC with a low current draw of only 200 mA.

AVA AUDIBLE AND VISUAL FIRE ALARM UNIT The AVA can be dash mounted to provide repeat Fire Alarm warning at a flybridge station. The AVA can be surface mounted, In the Engine Room to provide Fire Alarm and Fire Extinguisher release warnings, by using the optional surface mounting enclosure.

HIAVA AUDIBLE AND VISUAL FIRE ALARM UNIT

The ITIM Systems HIAVA - is a High Intensity Audible and Visual Fire Alarm Unit intended for installation in larger engine rooms or those with a high noise level. It consists of a 11 0dB Audible Alarm screamer and a Red Xenon Strobe Visual Alarm unit mounted into the lid of a surface mount enclosure measuring 160 x 110 x 125 mm deep. Power supply can be 12 or 24 vdc, current draw = 350mA Power supply wiring terminates on PCB mounted terminals within the enclosure.

BAVA - AUDIBLE AND VISUAL BILGE ALARM UNIT

The ITIM Systems BAVA - (Bilge, Audible and Visual Alarm unit) consists of a sealed enclosure measuring 125 x 75 x 30mm deep, with four corner screw mountings, and a central 2 way terminal on the rear for connection of +ve & -ve DC power supply.

This unit provides both audible and visual Bilge Alarm warning.

The audible alarm consists of a modulated pezio electric sounder, producing approximately 90 db at one metre

The visual alarm consists of an array of red ultra-bright LEDs mounted behind the sealed lexon label to illuminate the visual warning "BILGE LEVEL HIGH" with a red flashing signal which is visible from a wide viewing angle.