TANK LEVEL MONITORING, DISPLAY & CONTROL SYSTEMS

Interactive Demonstration (434kb) INTERACTIVE AIM TC BLACK WATER

TLMP-98 TANK LEVEL MONITORING PROBE

The tlmp-98 sensor incorporates a loop powered solid state differential pressure sensor which measures the level of liquid in your tank & provides a 4-20ma output proportional to tank height. 316 stainless steel housing 38mm dia. Sensor powered from +10 to 36 v dc. Plug in terminal on top for 2 core shielded cable to display. Rubber boot water shield. Sensor can be top or bottom mounted. ½” bsp t(m) mounting thread.

Suitable for fuel, fresh, grey, black & bilge water & lube oil etc. Suitable for tanks, up to a depth of 3,000mm. TLMP-98 sensor is custom built to your tank depth and supplied precalibrated ready to screw in.

BG-98 20 LED BAR GRAPH MODULES

  • 20 LED colour coded bargraph display of tank level.
  • Housed in compact flush mount modules 36x72mm.
  • Modules for fuel, fresh, grey, black & bilge water oil tanks etc.
  • Simple to install with 4 way plug-in terminal on rear for connection to power (12 or 24 vdc) & TLMP-98 Tank Level Monitoring Probe.

AIM-TA FUEL TANK ALARM, LEVEL DISPLAY, HIGH & LOW ALARMS.

  • Provides 20LED display of tank level with independent tank high and tank low alarms.
  • The AIM-TA is easy to use with system status display back illuminated by multi coloured LEDs for easy to read, instant status recognition.
  • Sealed touch switch controls with tactile feedback for greater reliability.
  • Independently adjustable high & low alarms.
  • Compact flush mount module 55 x 99 x 125mm deep.
  • Simple to install with plug-in wiring terminal on rear and wiring drawing on the side.

AIM-TC DAY FUEL TANK CONTROLLER, DISPLAY & ALARMS.

  • Provides 20LED display of tank level with manual pump up controls and alarms configured for control of grey & black water tank pump out, day fuel tank top up, fresh water tank level control etc.
  • The AIM-TC V4 is easy to use with system status display back illuminated by multi colour LEDs for easy to read, instant status recognition.
  • Sealed touch switch pump and alarm controls with tactile feedback for greater reliability.
  • Independently adjustable, alarms, pump on and pump off levels.
  • Compact flush mount self contained module 55 x 99 x 125 mm deep.
  • Simple to install with plug-in wiring terminal on the rear of module and wiring drawing on the side.

AIM-HTC HOLDING TANK CONTROLLER, DISPLAY & ALARMS

  • Provides 20LED display of tank level with auto or manual pump out controls and alarms configured for control of grey & black water tank pump out.
  • The AIM-TC V4 is easy to use with system status display back illuminated by multi coloured LEDs for easy to read, instant status recognition.
  • Sealed touch switch pump and alarm controls with tactile feedback for greater reliability.
  • Independently adjustable alarms, pump due/run and pump off levels.
  • Compact flush mount self contained module 55 x 99 x 125 mm deep.
  • Simple to install with plug-in wiring terminal on the rear of module & wiring drawing on the side.

AIM-TC BLACK WATER TANK

  • Provides 20LED display of tank level with manual start, auto off controls and alarms configured for control of your black water tank pump out.
  • The AIM-TC V4 is easy to use with system status display back illuminated by multi coloured LEDs for easy to read, instant status recognition.
  • Sealed touch switch pump and alarm controls with tactile feedback for greater reliability.
  • Independently adjustable tank height alarms, pump due/run and pump off levels.
  • Compact flush mount self contained module 55 x 99 x 125 mm deep.
  • Simple to install with plug-in wiring terminal on the rear of module and wiring drawing on the side.

AIM-TA FRESH WATER TANK ALARM, LEVEL DISPLAY, HIGH & LOW ALARMS.

  • Provides 20LED display of tank level with independent tank high and tank low alarms.
  • The AIM-TA is easy to use with system status display back illuminated by multi coloured LEDs for easy to read, instant status recognition.
  • Sealed touch switch controls with tactile feedback for greater reliability.
  • Independently adjustable display, high & low alarms.
  • Compact flush mount module 55 x 99 x 125mm deep.
  • Simple to install with plug-in wiring terminal on rear & wiring drawing on the side.

AIM HTC BILGE CONTROLLER

All of the features of the AIM-TC but with addition of Auto/Manual pump out mode select switch, so that pump out mode can be varied between manual pump start and
auto pump start to suit your operational area.

  • The AIM-HTC V4 is easy to use with system status display back illuminated by multi coloured LEDs for easy to read, instant status recognition.
  • Sealed touch switch pump out, mode and alarm controls for greater reliability.
  • Independently adjustable display, alarms, pump on and pump off levels.
  • Compact flush mount self contained module 55 x 99 x 125 mm deep.
  • Simple to install with plug-in wiring terminals on the rear of module & wiring drawing on the side.

AIM HTC GREY WATER TANK CONTROLLER

All of the features of the AIM-TC but with addition of Auto/Manual pump out mode select switch, so that pump out mode can be varied between manual pump start and
auto pump start to suit your operational area.

  • The AIM-HTC V4 is easy to use with system status display back illuminated by multi coloured LEDs for easy to read, instant status recognition.
  • Sealed touch switch pump, mode and alarm controls with tactile feedback for greater reliability.
  • Independently adjustable display, alarms, pump on and pump off levels.
  • Compact flush mount self contained module 55 x 99 x 125 mm deep.
  • Simple to install with plug-in wiring terminals on the rear of module & wiring drawing on the side.