|
| |
TANK
LEVEL MONITORING, DISPLAY, ALARM & CONTROL SYSTEMS |
| |
|
|
|
 |
 |
The
TLMP-98 sensor is a loop powered, solid state pressure transducer
which measures the level of liquid in your tank and provides a
4-20mA output proportional to tank level.
316
stainless steel housing 38mm dia. Sensor powered from +10 to 36
V DC. Plug in terminal on top for 2 core shielded cable to display.
Rubber boot water shield. Sensor top or bottom mounted, 1/2 inch
BSPT(M) mounted thread. Suitable for fuel, fresh, grey, black
and bilge water and lube oil tanks, up to depth of 3,000mm. TLMP-98
sensor supplied precalibrated ready to screw in.
The
TLMP-98 Tank Level Monitoring Probe can be connected to any of
the following Display Modules.
 Download pdf
|
|
*
20 LED colour coded bargraph display of tank level.
*
Housed in compact flush mount module 36 x 72mm.
*
Modules for fuel, fresh, grey, black & bilge water, oil tanks.
*
Simple to install with 4 way plug-in terminal on rear for connection
to power (12 or 24 vdc) & TLMP-98 tank level sensor.
Download pdf |
|
 |
*
Provides 20LED display of tank level with auto & manual pump
controls and alarms configured for control of grey & black
water tank pump out, day fuel tank top up, fresh water tank level
control etc.
*
Provides 20LED display of tank level with tank full and empty
alarms.
The
AIM-TC is easy to use with system status display back illuminated
by LED light bars for instant status recognition.
*
Sealed touch switch pump and alarm controls for greater reliability.
*
Independently adjustable display, alarms, pump on and pump off
levels.
*
Compact flush mount self contained module 48 x 96 x 125 mm deep.
*
Simple to install with plug-in wiring terminals on the rear of
module.
Download pdf |
|
|
|
*
Provides 20LED display of tank level with independent tank full
and empty alarms. The AIM-TA is easy to use with system status
display back illuminated by LED light bars for instant status
recognition.
*
Sealed touch switch test & alarm controls for greater reliability.
*
Independently adjustable display, and high and low alarm levels.
*
Compact flush mount self contained module 48 x 96 x 125 mm deep.
*
Simple to install with plug-in wiring terminals on the rear of
module.
Download pdf |
All of the features of the AIM-TC with addition of Auto/manual pump out mode select switch, so that pump out mode can be varies to suit your operational area.
Download pdf |
|
 |
*
Three digit LED display of tank contents % full (0.1% resolution)
*
Flush mount 66x96 display module, with eight stage display dimmer.
The
DIGITANK 1 module is self contained with wire plug-in on rear.
The
DIGITANK 8 display is switch selectable between up to eight tanks
via sealed touch switch with tank number display.
*
A multiplexed sensor scanner is mounted separately under the dash
with plug-in wiring terminals for connection to prewired DIGITANK
8 display module, up-to eight (8) TLMP tank level monitoring probes,
and system power supply 12 or 24 volts DC.
Download pdf |
|
CONTREC 220 PROGRAMMABLE = LCD DIGITAL DISPLAY
|
The TLMP-98 4-20mA Tank level Monitoring Probe will connect directly to the Contrec 220 display which can be programmed to suit off sized tanks & provide a 7 digit LCD readout of Litres or Gallons remaining in tank.
Download pdf |
Innovative Technology for Industry and Marine
P.O. Box 218 Red Hill, Qld 4059, Australia
|
4 Cramond Street, Wilston,
Qld 4051, Australia
ISD + 61 7. Phone (07) 3356 1276. Fax (07) 3356 5693 |
|
